Translate this Web Site to French, and other languages.
Tecleo aquí para una traducción española.
Cuando usted hace clic aquí usted irá a un sitio del traductor. Una vez que allí, pulse adentro a www.sheridanhvac.com en el traductor del Web page NO el rectángulo de texto.

SHERIDAN MECHANICAL SERVICES
    Serving the perimeter of Denver, CO.
  (303) 669 - 3876

TERMS OF USE OF EQUIPMENT ORDERING PAGE.  PLEASE READ CAREFULLY!

ALL SALES ARE FINAL!

There are serious personal safety issues involved with installing any humidifier, air cleaner, thermostat, any heating or cooling parts, or equipment  as well as possibly damaging the equipment and it's components as well as the equipment it is being installed on. For these reasons, only qualified persons should be installing this equipment. If you aren't qualified you should call a Heating and Air Conditioning Service or Installation Company to install these products. However, many clients have purchased humidifiers and successfully installed them on their own. Only you know if you can do the job. Perhaps you may have a friend that can do it for you?  If you or a friend can, you will save considerably. Inspect any order immediately when received and report any damage to the carrier. Sheridan Mechanical Services does not give refunds on equipment, or parts. All equipment and parts is sold as is directly to the consumer. Customer is responsible for diagnosing problems before ordering any part or equipment.

Most humidifiers have a 24 volt transformer installed in a 120 volt circuit near the furnace or air handler. This transformer should always have 120 volt power supplied to it so it may be sending 24 volts of power to the humidifier circuit. ( read instructions that came with humidifier ). Bear in mind that air handlers as used for heat pumps, as well as some fossil fuel furnaces, usually use 230 volts. Also some humidifiers have a humidistat that relies on 120 volt power rather than 24 volt. ( read instructions that came with the humidifier you purchased ). Installing the transformer to a 230 volt circuit WILL destroy the transformer. There are serious personal safety issues involved with installing any humidifier as well as possibly damaging the humidifier and it's components as well as the equipment it is being installed on. For these reasons, only qualified persons should be installing this equipment. If you aren't qualified you should call a Heating and Air Conditioning Service or Installation Company to install these products.

All humidifiers will require that a hole be cut in one of the sheet metal trunks or plenums. Gloves and safety glasses need to be worn while doing this as serious personal  injury can result while installing the humidifier and it's components.

The openings should be cut so as to keep the humidifier level and square. If it is installed in an un square or un level position it may not operate or drain correctly depending on the model you purchase. Always follow the manufacturers installation instructions.

All humidifiers should be installed with the a relay found on our Humidifier Ordering Page to protect all equipment. Serious equipment damage can be caused by not installing the  relay.

Sheridan Mechanical Services will not be held responsible for personal injury or damage to any part or equipment and no warranty expressed or implied is given by Sheridan Mechanical Services regarding the installation, returns, shipping or manufacture of any products we ship to consumers. By clicking on the link below you are accepting the terms of use and you agree you have read and understand the terms of use of our Ordering Forms.

To proceed on to our Equipment Ordering Page please Click Here.