Translate this Web Site to French, and other languages.
Tecleo aquí para una traducción española.
Cuando usted hace clic aquí usted irá a un sitio del traductor. Una vez que allí, pulse adentro a www.sheridanhvac.com en el traductor del Web page NO el rectángulo de texto.

EQUIPMENT SPECIFICATIONS

To keep our clients informed so that they may order the correct equipment for their needs we have made this section of our web site.

Please read this page carefully, as mis matching equipment not only will not work but will damage the equipment. Further more with the addition of the new R410A refrigerant only compatible units will work with this new refrigerant.

Also if you are trying to get an Energy Rebate from your local Power Company you MUST install the correct air handler/evaporator/coil combinations to get the published efficiency rating in the A.R.I. ( American Refrigeration Institute ) Directory. This A.R.I. Directory is what your Power Company will go by, BEFORE issuing you a rebate.

If you are getting quotes from other companies be sure they understand these important considerations.

We have shown all information about the equipment including the dimensions and weights.

To use the pages of specifications please click on the links below and record the information on model number and  weight if you want to find shipping costs.

Disclaimer:
Installation of any Heating or Cooling equipment must be done by persons trained in this Trade. Serious personal injury or death can occur by improper installations. Further, equipment warranty from the manufacturer will most likely be rejected from faulty installations. Furnaces installed at varying altitudes will require altering equipment parts. L.P. (Propane) installations require changing burner orifices and gas valve regulator springs with the proper factory supplied kit. Fuel pressure will need to be set using special equipment by an H.V.A.C. professional. (2) stage furnaces will require a 2 stage heating thermostat and related wiring for the furnace to function as it should. Pressure switches for your altitude will need to be ordered and the pressure switches in the furnace you receive ( which are installed for the Denver area ) will need to be replaced with these! Sheridan Mechanical Services will not be liable for any installations by others nor will we accept any responsibility for damages to people, equipment, buildings or parts.
Open any shipping cartons and examine contents for damage before accepting delivery so that you may make a claim to the Carrier on the spot as we will not be responsible for damages from shipping.

A/C Specifications    Heat Pump Specifications    Air Handler Specifications 80% Single Stage Heat Furnaces   80% 2 Stage Heat/Variable Speed Furnaces   All 90% Gas Furnaces   Electric Heaters for Air Handlers   410A Refrigerant Evaporator Coils   R-22 Evaporator Coils  Electronic Air Cleaner Specs