Tips For Finding The Best Heat Pumps

Heat pumps are essential components of houses and offices in colder parts of the world. These heat pumps allow you to turn the temperature of a closed environment up. They are extremely handy and can make conditions liveable again within a matter of minutes. With so many options in the market, it is hard to choose the one that fits your requirement perfectly.

So, here is a small guide that will help you find the perfect heat pump for your office/home.

Water or Air Pump?

While choosing the pump the first question that you will face is the choice between an air pump and a water pump. Heat pumps are majorly classified into these two types. While one uses water to heat up the environment the other one uses air.

The water pump works in a closed environment and the heat radiates out of the pipes. The air pump has an open flow structure and it throws out hot air for the room.

  • Choosing the Water Pump
  • Choosing the Air Pump

The water pump is good to keep the entire warm and cosy for a long period without wasting too much electricity. However, it takes a long time for it to start heating up the environment.

The air pump can instantly heat up the environment. However, it cannot retain that heat for a long period without a constant source of electricity.

Power Efficiency

The water pumps are usually more power efficient compared to the air pumps. The electrical efficiency of these devices is measured in star ratings. If you live in an extremely cold region that suffers from low temperatures for a majority of the year, you need a very power efficient device. In case you are planning on using the device for only a couple of weeks a year, a low-efficiency device works just fine.

The high-efficiency devices will often cost significantly more than the ones with a lower efficiency.

heating pump

Heating Capacity

You need to carefully assess the size of the room that you want to heat up with the device. In case the room is very large, you need a huge pump that can heat up larger spaces. In case of a smaller area, a tiny room heater might just do the trick.

Number of Vents

Depending on the size of the room, you might need a pump with several vents. A higher number of vents is ideal for heating up larger spaces.

Installation Parameters and Size

You carefully need to study the installation parameters and size of the device before choosing the best heat pump for yourself. It is a good idea to get expert advice from a couple of reliable heat pump suppliers in the market after evaluation of your space.

Make sure that you choose a pump that fits your budget and heating requirements just right. You might not find the ideal fit every time so it is better to compromise a little on the budget than the heating capacity of the device.


Know the Different Types of HVAC Systems

If you have done an assessment for energy efficiency in your home, maybe had additional installed insulation, and you are hiring a cooling or heating professional, then it is now time to decide on the best HVAC system for your place. Nowadays, newer systems offer a lot of options including multiple stages of cooling and heating, and variable fan speeds.

Zoned HVAC Systems

These can cool or heat individual areas of your house through controlling zone valves and zone dampers inside the ductwork or vents that block the air flow selectively. Zoned HVAC systems may save you money and energy through only cooling or heating particular areas whenever you need it.

Single and Multi-Stage HVAC Systems

Single-stage HVAC systems are popular in cold winter climates and humid and hot areas because the systems are set to give comfort for the warmest or coldest days of the year. Yet, this also means that most of the time, such heating systems are running at full capacity when they do not need to be. This is where multi-stage system comes in handy and may save you money and energy. You may also get single-stage system with different fan speeds to make variable air flow.

Humidity Control

Dehumidifiers and humidifiers may be added as options to cooling and heating systems and if you are living in humid or dry climate, such upgrades must absolutely be on your list. Over 50% relative humidity is optimal for human beings. With such systems, you may control the levels of humidity automatically in a home as you cool and heat, even if it isn’t available through the forced-water heating system that uses boilers. With dehumidification or humidity systems designed into furnaces or air conditioning units, you can’t control the levels of humidity once the system isn’t turned on. If you want to, you may add separate systems for dehumidification or humidity.

Retrofit Options

There are times that you not have to replace your cooling and heating system you have and may get by with a key. There are tons of possibilities that are cheap and may save you money. In oil- and gas-fired furnaces or boilers, adding vent dampers close off air loss up the chimney when the furnace or boiler isn’t running. The intermittent ignition devices turn off the pilot lights in the older systems when not required. Minimizing the size of gas burner can downsize any oversized system effectively.

Basically, there are countless kinds of HVAC systems you will find in the market. If you are confused with the options and you don’t know which to pick, you can always ask for help from the professionals. The first thing you should do is to ask for consultation. Make sure to tell the professionals about your needs and preferences for them to give you the options that would fit for your unique requirements. You must also set your budget as not all HVAC systems are made affordable, some are really expensive, yet definitely worth your investment with their features.

Our HVAC Partner in Durham Region