Translate this Web Site to French, and other languages.
Tecleo aquí para una traducción española.
Cuando usted hace clic aquí usted irá a un sitio del traductor. Una vez que allí, pulse adentro a www.sheridanhvac.com en el traductor del Web page NO el rectángulo de texto.

410A REFRIGERANT EVAPORATOR COILS

Disclaimer:
Installation of any Heating or Cooling equipment must be done by persons trained in this Trade. Serious personal injury or death can occur by improper installations. Further, equipment warranty from the manufacturer will most likely be rejected from faulty installations. Furnaces installed at varying altitudes will require altering equipment parts. L.P. (Propane) installations require changing burner orifices and gas valve regulator springs with the proper factory supplied kit. Fuel pressure will need to be set using special equipment by an H.V.A.C. professional. (2) stage furnaces will require a 2 stage heating thermostat and related wiring for the furnace to function as it should. Pressure switches for your altitude will need to be ordered and the pressure switches in the furnace you receive ( which are installed for the Denver area ) will need to be replaced with these! Refrigerant can not be bought, handled or installed by any one who does not hold a Federal E.P.A. card for the particular refrigerant. Refrigerant may need to be added for the system to operate correctly and to not void the manufacturer's warranty! Sheridan Mechanical Services will not be liable for any installations by others nor will we accept any responsibility for damages to people, equipment, buildings or parts.
Open any shipping cartons and examine contents for damage before accepting delivery so that you may make a claim to the Carrier on the spot as we will not be responsible for damages from shipping.

Comfort Coils ( Upflow/Downflow/Horizontal )
Use these coils for gas and oil furnaces for 12 S.E.E.R and higher units. 410A refrigerant ONLY!

** Coil protrudes out of top of case.

Back to Equip. Specs.